升降平臺廠家介紹升降機電源故障進行診斷，在升降機運行環境中，大部分電源都是通過母線連接在配電網絡中的，但是這個升降機的電源是直接接入到配電網絡中的，從而造成配電網絡中的支路增加，對網絡線路的電流帶來較大程度的干擾，從而導致故障信號存在較大程度的波動。
Lift manufacturers introduce lift power failure diagnosis, the lift operating environment, most power supplies are connected by bus in the distribution network, but this power is a direct lift access to the distribution network, resulting in the distribution the branch network increased, the current network lines bring a greater degree of interference, resulting in a fault signal a greater degree of volatility.
升降平臺廠家談到利用傳統算法進行故障診斷，無法對這種信號波動進行準確的分類，導致故障診斷的精度降低，電源故障信號特征減小，將造成升降機電源故障的錯誤診斷，從而降低了升降機電源故障診斷的準確性。
Speaking lift manufacturers using traditional algorithms for fault diagnosis, this signal fluctuations can not be accurately classified, resulting in reduced accuracy of fault diagnosis, power failure signal characteristics is reduced,it will cause an error diagnostic lift power failure, thus reducing the power lift the accuracy of fault diagnosis.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
